Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-808YC
14
6.5 Setting the DIP-switches
Figure 9 illustrates the factory default DIP-switches:
Figure 9: DIP-switch Settings
Table 4: DIP-switch Settings
Function DIPS Description
Machine # 1, 2, 3, 4 Determines the position of a unit in the sequence (see section 6.5.1)
Reserved 5 OFF
Reserved 6 OFF
Reserved 7 OFF
RS-485 Termination 8
ON for RS-485 Line Termination with 120;
OFF for no RS-485 Line Termination
6.5.1 Setting the MACHINE #
The MACHINE # determines the position of a VS-808YC unit, specifying
which VS-808YC unit is being controlled when several VS-808YC units
connect to a PC or serial controller. Set the MACHINE # on a VS-808YC unit
via DIPS 1, 2, 3 and 4, according to Table 5.
When using a stand-alone VS-808YC unit, set the MACHINE # to 1. When
connecting more than one VS-808YC unit, set the first machine (the Master)
that is closest to the PC, as MACHINE # 1
1
.
Table 5: Machine # DIP-switch Settings
DIP-Switch DIP-Switch
MACHINE #
1 2 3 4
MACHINE #
1 2 3 4
1
Master
OFF OFF OFF OFF 9 ON OFF OFF OFF
2 OFF OFF OFF ON 10 ON OFF OFF ON
3 OFF OFF ON OFF 11 ON OFF ON OFF
4 OFF OFF ON ON 12 ON OFF ON ON
5 OFF ON OFF OFF 13 ON ON OFF OFF
6 OFF ON OFF ON 14 ON ON OFF ON
7 OFF ON ON OFF 15 ON ON ON OFF
8 OFF ON ON ON 16 ON ON ON ON
1 Set the DIP-switches to OFF