Manual
Your VS-808YC 8x8 s-Video / Audio Matrix Switcher
5
Table 1: Front Panel VS-808YC 8x8 s-Video / Audio Matrix Switcher Features
# Feature Function
1 IR Receiver The LED is illuminated when receiving signals from the Infrared remote
control transmitter
2 Power Switch Illuminated switch for turning the unit ON or OFF
3 OFF Button An OFF-OUT combination disconnects that output from the inputs; an
OFF-ALL combination disconnects all the outputs
4 ALL Button Pressing ALL followed by an INPUT button, connects that input to all outputs
1
5 OUTPUT Buttons
Select the output to which the input is switched
6
SELECTOR
INPUT Buttons Select the input to switch to the output
7 TAKE Button Pressing TAKE toggles the mode between the CONFIRM mode
2
and the
AT ONCE mode (user confirmation per action is unnecessary). When in
TAKE mode, pressing TAKE implements the action
8 VIDEO Button When pressed
3
actions relate to video, and display shows video status
9 AUDIO Button When pressed
4
actions relate to audio, and display shows audio status
10 AFV Button When pressed
5
actions relate to video and audio channels. Audio channels
follow the video channels
11 STATUS 7-segment
Display
Displays the selected input switched to the output (marked above each
input)
6
12 STO (STORE) Button
Pressing STO followed by an output button stores the current setting
7
13 RCL (RECALL)
Button
Pressing the RCL button and the corresponding OUTPUT key recalls a
setup from the non-volatile memory. The stored status blinks. Pressing a
different OUTPUT button lets you view
8
another setup. After making your
choice, pressing the RCL button again implements the new status
14 LOCK Button Engages/disengages the front panel switches. Button is illuminated when
front panel is locked
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
2 When in Confirm mode, the TAKE button illuminates
3 The VIDEO button is illuminated when the video breakaway mode is selected
4 The AUDIO button is illuminated when the audio breakaway mode is selected
5 The AFV button is illuminated when the AFV mode is selected
6 Also displays the firmware version number and the MACHINE #. Refer to section 8.1
7 For example, press STO and then the Output button # 3 to store in Setup # 3
8 Only view, nothing is implemented at this stage