Owner's manual

Connecting and Controlling the VS-81ETH
11
5.4 Setting the Dipswitches
By default, all dipswitches are set to OFF. Figure 7 illustrates the VS-81ETH
dipswitches:
ON
1 2 3 4
SETUP
Figure 7: VS-81ETH SETUP Dipswitches
5.4.1 Setting the Machine # Dipswitches
The Machine # (dipswitches 1 to 4) determines the position of a VS-81ETH
unit, specifying which VS-81ETH unit is being controlled when several
VS-81ETH units connect to a PC or serial controller. Set the Machine # on a
VS-81ETH unit via SETUP DIPS 1, 2, 3 and 4, according to Table 4.
When using a standalone VS-81ETH unit, set the Machine # to 1. When
connecting more than one VS-81ETH unit, set the first machine (the Master)
that is closest to the PC, as Machine # 1 (dipswitches are set to OFF).
Table 4: Machine # Dipswitch Settings
Mach. # DIP 1 DIP 2 DIP 3 DIP 4
1 OFF OFF OFF OFF
2 OFF OFF OFF ON
3 OFF OFF ON OFF
4 OFF OFF ON ON
5 OFF ON OFF OFF
6 OFF ON OFF ON
7 OFF ON ON OFF
8 OFF ON ON ON