user manual

10 DS Vision® Digital - Media Distribution
Figure 7: Receiver Connections
5.1 Mounting the Receiver
The receiver units have VESA standard screw holes 100mm (3.9in) apart, as
shown in
Figure 8. Use two screws supplied with the receiver and monitor to
connect the unit to the back of the monitor.
Figure 8: VESA Standard Screw Holes
DS Vision Digital
RECEIVER
MINIC M
digital signage
100mm
Receiver
CAT
5
e cable from
Transmitter
System port
To Media Feedback
Monitoring Engine
Ethernet cab
le to
network
Serial cable to display
control
HDMI cable to
display
Power connector
CONTROL MONITOR
12
V
DC
SYSTEM ETHERNET HDMI