Owner manual

PT-110xl, WP-110, PT-120xl, TP-120 - PT-110xl UXGA Line Transmitter

3.2 Connecting the PT-110xl UXGA Line Transmitter

To connect the PT-110xl (as shown in Figure 2) do the following:

1. Connect a UXGA source (for example, a computer graphics card) to the

15-pin HD UXGA INPUT connector.

2. Connect a CAT5/6 cable to the RJ-45 LINE OUT connector.

3. On both the PT-110xl and the TP line receiver, connect the 12V DC power

adapter to the power socket and connect the adapter to the mains electricity.

The signal from the UXGA source is transmitted via CAT 5 cable, decoded

and converted at the UXGA OUT 15-pin HD (F) connector to the UXGA

acceptor.

For details of the power connect feature see Section 2.4.

Figure 2: Connecting the PT-110xl UXGA Line Transmitter