Owner manual

86
K-Config - Using the Triggers
Figure 150: Timer Events – the Timer Trigger Action List
Step II: Define the Button Trigger
7. Define a button trigger: Button 3 - Click (see Section 8.2).
8. From the Action Type list select Port Command and add the projector power on (PWR_ON) command:
Figure 151: Timer Events – Projector Power On Command in the Button Trigger Action List
9. From the Action Editor list select Timer Start/Stop and select the relevant Timer Trigger (in this example,
Timer – PRJON):
Figure 152: Timer Events – Selecting the Timer Start/Stop Action