User Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your 7408 SDI to Analog Converter
4
Figure 1: 7408 SDI to Analog Converter
Table 1: 7408 SDI to Analog Converter
# Feature Function
1
12V DC
+12V DC connector for powering the unit
2
V / C BNC connector
Connect to: component video or composite video and/or s-Video
acceptors (according to DIP-switch selection − see Table 3
)
3
U / Y BNC connector
4
Y / CV
5 SDI OUT BNC Connector Connects to the reclocked and equalized SDI acceptor
6 SDI IN BNC Connector Connects to the SDI source
7
ON LED
Illuminates when receiving power
8 RS-232 Port Connects to the PC or the remote controller
9 DIP-switches To setup the unit (see section 5.2)
COMPONENT AUTO PAL NTSC 4xOS PEDESTAL VBI PROGRAM