Manual

8
920 - Connecting the 920
To connect the 920 as illustrated in the example in Figure 3:
1. Connect a balanced, stereo audio source, (for example, a multimedia player)
to the 5-pin Line Input terminal block and an unbalanced stereo audio source
to the Line Input RCA connectors.
2. Select the BAL-RCA switch accordingly.
3. Connect a microphone to the 3-pin Mic Input terminal block.
4. Connect the speaker(s) to the Speaker Out 3-pin terminal block, (see
Section 5.2).
5. Connect the unit to the mains supply using the supplied power cord.
5.2 Connecting Speakers
You can connect one or more 70V or 100V speakers to the 920. When connecting
more than one speaker they must be connected in parallel as shown in Figure 4
(100V speakers) and Figure 5 (70V speakers).
Figure 4: Connecting One or Multiple Speakers to the 920 (100V)