Manual

10
920 - Technical Specifications
6 Technical Specifications
INPUT:
1 Balanced stereo +4dBu/10kΩ on a 5-pin removable terminal
block
1 Unbalanced stereo on 2 RCA connectors
OUTPUT:
1 speaker 70/100V output on a 3-pin removable large terminal
block
INPUT SENSITIVITY:
0.3V to 1.23V –10dBu to 4 dBu
OUTPUT POWER:
200W
AMPLIFIER TYPE:
Class D
MAXIMUM VOLTAGE
GAIN:
+26dB
BANDWIDTH (-3dB):
20Hz to 20kHz
S/N RATIO:
–75dB @14dBu amplification (0.039%)
CONTROLS:
Screw trimmer for line and mic input sensitivity
HIGH PASS FILTER:
When on:
Frequencies below 120Hz are attenuated by 12dB per octave,
–12dB @120Hz
–24dB @60Hz
–36dB @30Hz
INPUT SATURATION:
Maximum input level is 3.9V pp @ –48dB
AUDIO THD + NOISE:
70v main output: –71dB @ 7.8 dBu amplification
100v main output: –72 db @ 8.3 dBu amplification
AUDIO 2nd
HARMONIC:
0.08% for 70v/100v output
POWER SOURCE:
See label by power socket on rear panel of unit:
USA version: 100-120V AC, 50/60Hz, 330VA
OR
European version: 200-240V AC, 50/60Hz, 480VA
DIMENSIONS:
19” x 7.25” x 1U (W, D, H) rack-mountable
WEIGHT:
1.7kg (3.75lbs) approx.
INCLUDED
ACCESSORIES:
Power cord, rack ears
Specifications are subject to change without notice at http://www.kramerelectronics.com