Spec Sheet

C-D9F/OPEN

RS−232 to Open End Control Cable

Kramer's C−D9F/OPEN control cables are for RS−232

applications to control devices within a professional

AV system. Many Kramer products are RS−232

controllable and equipped with terminal block

connector. This RS−232 cable helps to connect them

safely to transmit the RS−232 serial commands to a

touch−screen system, PC, or other serial controller

equipped with D9 connector

FEATURES

Quality Construction-Constructed using three 28AWG isolated conductors, terminated with a molded

female 9−pin D−sub connector, nickel plated on one side and open end, non−terminated, on the

second side

Pinout-Wired pin to pin on pins 2, 3 & 5

Molded Strain Relief

Stripped & Tinned Wires-At open end

RoHS Compliant

Varied Selection of Lengths-3 to 50ft (1 to 15m)



PAGE 1
C-D9F/OPEN RS−232 to Open End Control Cable Kramer's C−D9F/OPEN control cables are for RS−232 applications to control devices within a professional AV system. Many Kramer products are RS−232 controllable and equipped with terminal block connector.
PAGE 2
TECHNICAL SPECIFICATIONS Pinout Red − pin 2; White − pin 3;Black − pin 5 CONDUCTORS Material Tinned Copper 3–10ft (0.9–3m) lengths 28AWG 15-50ft (4.6 -15.
PAGE 3
CONFIGURATIONS C-D9F/OPEN-3 RS-232, D9(F) to bare end cable C-D9F/OPEN-6 RS-232, D9(F) to bare end cable C-D9F/OPEN-10 RS-232, D9(F) to bare end cable C-D9F/OPEN-15 RS-232, D9(F) to bare end cable C-D9F/OPEN-25 RS-232, D9(F) to bare end cable C-D9F/OPEN-35 RS-232, D9(F) to bare end cable C-D9F/OPEN-50 RS-232, D9(F) to bare end cable