Spec Sheet

C-DMA/5BM
DVI-A to 5 BNC Breakout Cable
Kramer’s DMA/5BM series DVI male to 5 BNC male
are cables designed to adapt between the analog pins
of DVI-I and typical RGBHV. DVI video cards often
output signals in both digital and analog format and,
conversely, display devices often accept an analog
RGBHV type signal using a DVI connector
FEATURES
Quality Construction-Rugged cable with molded connectors and gold−plated pins
Compatibility-Use this adapter when you need access to the analog signal present at a DVI−I
source, or when you need to connect analog RGBHV to a display that provides only a DVI−I input.
Note that this adapter does not convert analog to digital or digital to analog. Always verify
compatibility details for the source/destination in your application
Varied Selection of Lengths-Available in versions of 0.9 to 4.6m (3, 6, 10 and 15ft)
CONFIGURATIONS
C-DMA/5BM-3
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
C-DMA/5BM-6
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
C-DMA/5BM-10
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
C-DMA/5BM-15
DVI-A (M) to 5 BNC (M) Molded Breakout Cable