Manual

8
Galil 6-CO - Installing the Open-back Ceiling Speakers
3. Adjust each speaker to the appropriate tap setting before installing the grille
(see Figure 4).
Set the tap according to the power requirements of the speaker based on its location in
the room (for example, a speaker located in a remote corner would require additional
power)
Figure 4: Adjust Tap Selector
For 100V installations, DO NOT set the tapping switch beyond 30W.
Doing so may cause damage to both the speaker and the amplifier.
4. Insert the supplied screws into the screw openings from the front of the
speakers.
Connect the speaker wires to the speaker terminals.
5. Connect the speaker wires to the speaker terminals.
Figure 5 shows a schematic diagram of the Closed-back ceiling speaker
Pinout:
!