Spec Sheet

KDock-2
USB−C Hub Multiport Adapter
KDock−2 is a USB−C hub multiport adapter specially
designed to support mobile devices and is an ideal
accessory for MacBook, laptops equipped with USB
Type−C, smartphones, and tablets. KDock−2 enables
you to connect your USB−C device to an HDMI™
video output, 2 USB 3.0 ports, an Ethernet port, SD
card port and USB−C port for data transmission and
charging.
Note: Video output for smartphones is supported only
for smartphones that support DisplayPort Alt mode
through USB-C
TECHNICAL SPECIFICATIONS
Inputs
1 USB: On a USB Type−C male connector
Outputs
1 HDMI On a female HDMI connector.:
Ports
2 USB 3.0: On female USB type−A connectors
1 Ethernet: On an RJ−45 connector
SD: On an SD card port
1 USB: On a female USB type−C connector for data and charging
Video
Max Resolution (HDMI output): 3840x2160P@30Hz
Max Data Rate: (HDMI output): 10.2Gbps (3.4Gbps per graphic channel)
Content Protection (HDMI output): HDCP 1.4
Extended Ethernet
Max Data Rate 1000M (Gigabit)/100M/10M
Includes Wake–on–LAN (WoL), single Mac address, PXE boot
General
USB Data Transmission Speed (USB 3.0 & USB-C) up to 5.0Gbps
Power
Delivery 100W
USB Charging: BC1.2 (5V 1.5A)
USB Limited Current when Connected to Power via female USB-C port: 1.9A
USB Limited Current when Not Connected to Power via female USB-C port: 1A
Environmental
Conditions
Operating Temperature: 0° to +70°C (32° to 158°F)
Storage Temperature: −10° to +55°C (14° to 131°F)
Humidity: 5% to 90%, RHL non−condensing
Enclosure
Type: Aluminum with built−in 16cm/6.3" flexible USB−C cable
Regulatory
Compliance
(Standards
Compliance)
Safety: CE
Environmental: RoHs, FCC