Spec Sheet

KDock-3
USB−C Hub Multiport Adapter
KDock−3 is a USB−C hub multiport adapter specially
designed to support mobile devices and is an ideal
accessory for MacBook, laptops equipped with USB
Type−C, mobile phones, and tablets. KDock−3
enables you to connect your USB−C device to HDMI™
and DisplayPort video outputs, 2 USB 3.0 ports, an
Ethernet port, SD card port and USB−C data and
charging pass−through.
Note: Video output for smartphones is supported only
for smartphones that support DisplayPort Alt mode
through USB−C
TECHNICAL SPECIFICATIONS
Inputs
1 USB: On a USB Type−C male connector
Outputs
1 HDMI On a female HDMI connector
1 DisplayPort: On a female DisplayPort connector
Ports
2 USB 3.0/2.0: On female USB type−A connectors
1 Ethernet: On an RJ−45 connector
1 USB 3.0: On a female USB type−C connector for data and charging
SD: On an SD card port
Video
Max Resolution 3840x2160P@30Hz (with one display connected)
Max Resolution 1920x1080P@60Hz (with two displays connected)
Max Data Rate (HDMI/DP output): 10.2Gbps (3.4Gbps per graphic channel)
Multiple Video Output Support Via MST (Multi−Stream Transport) technology
Content Protection (HDMI output): HDCP 1.4
Extended Ethernet
Max Data Rate 1000M (Gigabit)/100M/10M
Includes: Wake−on−LAN (WoL), single Mac address, PXE boot
General
USB 3.0 Data Transmission Speed (USB 3.0 & USB-C) up to 5.0Gbps
Power
Delivery 100W
USB Charging: BC1.2 (5V 1.5A)
USB Limited Current when Connected to Power via female USB-C port: 1.9A
USB Limited Current when Not Connected to Power via female USB-C port: 1A
Environmental
Conditions
Operating Temperature: 0° to +70°C (32° to 158°F)
Storage Temperature: −10° to +55°C (14° to 131°F)
Humidity: 5% to 90%, RHL non−condensing
Enclosure
Type: Aluminum with built−in 16cm/6.3" flexible USB−C cable
Regulatory
Safety: CE