Spec Sheet

KDock-4
USB−C Hub Multiport Adapter
KDock−4 is a USB−C hub multiport adapter specially
designed to support mobile devices and is an ideal
accessory for MacBook, laptops equipped with USB
Type−C, smartphones, and tablets. KDock−4 enables
you to connect your USB−C device to HDMI™,
DisplayPort, and VGA video outputs, 2 USB 3.0 ports,
1 USB 2.0 ports, an Ethernet port, SD and micoSD
card port and USB−C charging pass−through.
Note: Video output for smartphones is supported only
for smartphones that support DisplayPort Alt mode
through USB-C
TECHNICAL SPECIFICATIONS
Inputs
1 USB: On a USB Type−C male connector
Outputs
1 HDMI On a female HDMI connector
1 DisplayPort: On a female DisplayPort connector
1 VGA: On a female 15−pin HD connector
Ports
2 USB 3.0: On female USB type−A connectors
1 USB 2.0: On female USB type−A connectors
1 Ethernet: On an RJ−45 connector
SD: On an SD card port
1 Unbalanced Stereo On a 3.5mm mini jack
SD: On a microSD port
1 USB: On a female USB type−C connector for charging
Video
Max Resolution (HDMI/DP) 3840x2160P@30Hz (with one display connected)
Max Resolution (HDMI/DP) 1920x1080P@60Hz (with two displays connected)
Max Resolution (HDMI/DP) 1920x1080P@60Hz (with three displays connected)
Max Resolution (VGA) 1920x1080P@60Hz (with one or two displays connected)
Max Resolution (VGA) 1280x720P@60Hz (with three displays connected)
Max Data Rate (HDMI/DP output): 10.2Gbps (3.4Gbps per graphic channel)
Multiple Video Output Support Via MST (Multi−Stream Transport) technology
Content Protection (HDMI output): HDCP 1.4
Extended Ethernet
Max Data Rate 1000M (Gigabit)/100M/10M
Includes: Wake−on−LAN (WoL), single Mac address, PXE boot
General
USB 3.0 Data Transmission Speed: up to 5.0Gbps
Power
Delivery 100W
USB Charging: BC1.2 (5V 1.5A)