Spec Sheet

KDS-10
4K60 4:4:4 Dual Stream Transceiver
|HDMI |Ethernet-RJ-45
KDS−10 is an advanced, dual stream transceiver for
streaming 4K@60Hz (4:4:4) video signals via Ethernet
over copper cable. KDS−10 can be set as either an
encoder or decoder. As an encoder, it encodes and
streams one or two HDMI inputs over an IP network.
As a decoder, it receives the encoded signal, decodes
it and outputs it to an HDMI output
FEATURES
Advanced Video Streaming Transceiver-Streams up to 4K@60Hz (4:4:4) resolution signals over a
1G network interface, when streaming one source and 4K@30Hz (4:2:0) when streaming two sources
Multi-Standard Video Coding-Configure the transceivers according to your needs to stream using
either H.264 or H.265
Flexible Input and Output Options-Includes two HDMI inputs that can be streamed alternately or
simultaneously
Streaming Support-Unicast and multicast over RTP (Real−Time Protocol)
Flexible Analog Audio Embedding and De-embedding-When in encoding mode, you can select the
balanced analog audio input to embed into the streaming HDMI output signal. When in decoding
mode, you can extract the HDMI audio signal and output it as balanced analog audio
Convenient and Comprehensive Control-Control the unit using intuitive embedded web pages or
Protocol 3000 API commands via Ethernet
Simple System Management-Remote system management support to enable quick and efficient
remote system and device life−cycle management
