Spec Sheet

TECHNICAL SPECIFICATIONS
Inputs:
1 unbalanced stereo on a 3.5mm connector; 1 balanced stereo +4dBu/10kΩ on a 5
pin terminal block
Outputs:
1 balanced stereo line level on a 5−pin terminal block; 1 stereo or 1 mono speaker
output on a 4 pin large terminal block
Input Sensitivity:
Attains full power @ 0.3V (–10dBV)
Output Power:
2 x 60W @ 4Ω or 8Ω; 1 x 120W @ 70V or 100V
Amplifier Type:
Class D
Maximum Voltage
Gain:
26dB SE / 32dB BTL
Dynamic Range:
119dB
Frequency Response:
20Hz to 20kHz @ +/−1dB
S/N Ratio:
80dB −10dBV, 20 Hz − 20 kHz
Controls:
Screw trimmer amplifier attenuator, IP and RS−232
Audio THD + Noise:
THD+N (1kHz @ 1W) 0.003 %
Audio 2nd Harmonic:
0.08% @ 75W RMS @ 4Ω 6.67kHz
Power
Source: Universal mains operational voltage 85VAC – 265VAC
Consumption 150VA
Total System
Efficiency:
89.2%
Included Accessories:
Power cord
Product Dimensions
21.46cm x 16.30cm x 4.36cm (8.45" x 6.42" x 1.72" ) W, D, H
Product Weight
0.9kg (2.0lbs) approx
Shipping Dimensions
40.50cm x 29.70cm x 9.00cm (15.94" x 11.69" x 3.54" ) W, D, H
Shipping Weight
1.5kg (3.3lbs) approx