User's Manual
Table Of Contents
- Introduction
- Defining the PA-240Z 240W Power Amplifier
- Connecting the PA-240Z
- Operating the PA-240Z
- Using the Embedded Web Pages
- Technical Specifications
- Protocol 3000
Kramer Electronics Ltd.
PA-120Z, PA-240Z – Using the Embedded Web Pages
14
To browse the PA-240Z web pages:
1. Open your Internet browser.
2. Type the IP address of the device in the address bar of your browser. For example, the
default IP address:
The Authentication window appears (if security is enabled):
Figure 13: Using the Embedded Web Pages – Authentication Window
3. Enter the User Name (Admin, by default) and Password (Admin, by default) and click
OK.
The Speaker Output page appears:
Figure 14: Speaker Output Page with Navigation List on Left
4. Click the desired web page or click the arrow to hide the navigation list.