User's Manual
Table Of Contents
- Introduction
- Defining the PA-240Z 240W Power Amplifier
- Connecting the PA-240Z
- Operating the PA-240Z
- Using the Embedded Web Pages
- Technical Specifications
- Protocol 3000
Kramer Electronics Ltd.
PA-120Z, PA-240Z – Using the Embedded Web Pages
17
Setting the Line Level Output Parameters
PA-240Z enables automatically setting the line level output parameters according to the
speaker output parameters see Setting the Speaker Output Parameters on page 15 or setting
them manually via the Line Level Output page.
To set the line level output parameters independently (unlinked to speaker output
parameters):
1. In the Navigation pane, click Speaker Output. The Speaker Output page appears.
2. Click Unlinked.
3. In the Navigation pane, click Line Level Output. The Line Level Output page appears.
Figure 16: Line Level Output Page
4. Set the line level parameters in the Line Level Output page, as instructed for Setting the
Speaker Output Parameters on page 15.