User's Manual
Table Of Contents
- Introduction
- Defining the PA-240Z 240W Power Amplifier
- Connecting the PA-240Z
- Operating the PA-240Z
- Using the Embedded Web Pages
- Technical Specifications
- Protocol 3000
Kramer Electronics Ltd.
PA-120Z, PA-240Z – Using the Embedded Web Pages
18
Selecting Hi-Z Mono Settings
To select Hi-Z mono settings:
1. In the Navigation pane, click Audio Settings. The Audio Settings page appears.
2. Set the Hi-Z reduction to mono to one of the following:
▪ Select Left only to use left audio in connectors
▪ Select Stereo Down Mix to reduce the stereo input to mono.
Figure 17: Audio Settings Page