User's Manual

Kramer Electronics Ltd.
PA-120Z, PA-240Z – Using the Embedded Web Pages
22
3. Click Open.
The configuration loads and the Load Configuration message is displayed. This process
may take a few minutes to complete:
Once complete, the following message appears:
Figure 21: Device Settings Page – Configuration Uploaded
Performing a Factory Reset
To reset the device to its factory default values:
1. In the Navigation pane, click Device Settings. The Device Settings page appears
(Figure 18).
2. Click Factory reset. The following window appears:
Figure 22: Device Settings Page – Factory Reset
3. Click OK to start factory reset and follow the instructions on-screen.