User's Manual
Table Of Contents
- Introduction
- Defining the PA-240Z 240W Power Amplifier
- Connecting the PA-240Z
- Operating the PA-240Z
- Using the Embedded Web Pages
- Technical Specifications
- Protocol 3000
Kramer Electronics Ltd.
PA-120Z, PA-240Z – Using the Embedded Web Pages
24
To access Web pages using the password:
1. In the Navigation pane, click Security. The Authentication page appears
(Figure 18).
Figure 26: Password Settings Page – Security Deactivated
2. Set Activate Security to Enabled for Web page password protection. The following
message appears:
Figure 27: Password Settings Page – Security Activation Message
3. Click OK.
The connection is interrupted, and authentication is required to access web pages.
Figure 28: Password Settings Page – Security Log In
• 4. Type the User Name (Admin, by default) and Password (Admin, by default).
5. Click Log In.