User's Manual

Kramer Electronics Ltd.
PA-120Z, PA-240Z – Protocol 3000
32
Protocol 3000 Commands
This section includes the following commands:
• System Commands on page 32.
• Audio Commands on page 36.
• Communication Commands on page 44.
System Commands
Command
Description
#
Protocol handshaking (system mandatory)
BUILD-DATE
Get device build date (system mandatory)
FACTORY
Reset to factory default configuration
HELP
Get command list (system mandatory)
MODEL
Get device model (system mandatory)
PROT-VER
Get device protocol version (system mandatory)
RESET
Reset device (system mandatory)
SN
Get device serial number (system mandatory)
NAME
Set/get machine (DNS) name (system – Ethernet)
#
Functions
Permission
Transparency
Set:
#
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Protocol handshaking
#CR
Get:
-
-
Response
~nn@SPOKCR LF
Notes
Validates the Protocol 3000 connection and gets the machine number
Step-in master products use this command to identify the availability of a device
K-Config Example
“#”,0x0D