User's Manual

Kramer Electronics Ltd.
PA-120Z, PA-240Z – Protocol 3000
37
AUD-CLIP?
Functions
Permission
Transparency
Set:
-
-
-
Get
AUD-CLIP?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get clipping status
#AUD-CLIP?SPChannelCR
Response
~nn@AUD-CLIP?SPChannel,ClipStatusCR LF
Parameters
Channel – 1 (Speaker Output), 2 (Line Level Output)
ClipStatus – 1 (Clipping detected), 0 (Clipping not detected)
K-Config Example
Get the speaker output channel clipping status:
“#AUD-CLIP? 1”,0x0D
AUD-FILTER
Functions
Permission
Transparency
Set:
AUD-FILTER
End User
Public
Get
AUD-FILTER?
End User
Public
Description
Syntax
Set:
Set filter
#AUD-FILTERSPChannel,FilterType,Freq,StateCR
Get:
Get filter state
#AUD-FILTER?SPChannelCR
Response
~nn@AUD-FILTERSPChannel,FilterType,Freq,StateCR LF
Parameters
Channel – 1 (Speaker Output), 2 (Line Level Output)
FilterType – Filter type: 0 (High pass filter)
Freq – Filter frequency: 0 (T: 10kHz, M: 500Hz, B: 60Hz), 1 (T: 12.5kHz, M: 1kHz, B: 80Hz), 2 (T: 15kHz,
M: 1.5kHz, B: 500Hz), 3 (T: 17.5kHz, M: 2.5kHz, B: 200Hz)
State – 1 (On), 0 (Off)
Notes
T=Treble, M=Middle, B=Bass
K-Config Example
Set the audio filter on the speaker output on to high-pass filter, T: 10kHz, M: 500Hz, B: 60Hz:
“#AUD-FILTER 1,0,0,1”,0x0D