User's Manual

Kramer Electronics Ltd.
PA-120Z, PA-240Z – Defining the PA-240Z 240W Power Amplifier
4
Defining the PA-240Z 240W
Power Amplifier
This section defines the PA-240Z.
Figure 1: PA-240Z 240W Power Amplifier Front Panel
Figure 2: PA-120Z 120W Power Amplifier Front Panel
#
Feature
Function
ON LED
Lights green when powered on and orange when in standby.
INPUT 1 LED
Lights green when a signal is present on input 1.
INPUT 2 LED
Lights green when a signal is present on input 2.
MUTE
Lights red when the output is muted, off when unmuted.
CLIP LED
Lights red when the signal is clipped on the output and creating distortion.
(When clipping is detected, lower the volume until the LED turns off.)
PROTECT LED
Lights red in case of over-current / short circuit / over-heat.
The device shuts down until correct operational conditions are regained.