Spec Sheet

PT-110xl

Computer Graphics Video over Twisted Pair

Transmitter with EDID

The PT-110xl is an extended range UXGA line

transmitter that receives a UXGA signal and transmits

it over a CAT 5/6 cable to the PT-120xl or TP-120

receiver

FEATURES

Resolution-Up to WUXGA & 1080p

HDTV Compatible

Power Connect™ System-A single connection to the transmitter or the receiver powers both units

when the devices are within 150ft (50m) of each other

Extended Transmission Range-Up to 250m (820ft) when used with Kramer’s twisted pair xl receivers

(such as PT−120xl, TP−122xl or TP−126xl)

EDID Capture-Copies and stores the EDID from a display device

Increased Noise Immunity-An increased level of protection against noise, spikes and interference in

adverse environments



PAGE 1
PT-110xl Computer Graphics Video over Twisted Pair Transmitter with EDID The PT-110xl is an extended range UXGA line transmitter that receives a UXGA signal and transmits it over a CAT 5/6 cable to the PT-120xl or TP-120 receiver FEATURES Resolution - Up to WUXGA & 1080p HDTV Compatible Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other Extended Transmission Range - Up to 250m (820ft) when used with Kramer
PAGE 2
TECHNICAL SPECIFICATIONS INPUT: 1 VGA/UXGA on a 15−pin HD connector OUTPUT: 1 twisted pair on an RJ−45 connector RESOLUTION: Up to WUXGA, 1080p RANGE: Up to 250m (820ft) S/N RATIO: Paired with PT−120xl, better than 70dB (worst case) COUPLING: AC POWER CONSUMPTION: 12V DC, 285mA OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE: −40° to +70°C (−40° to 158°F) HUMIDITY: 10% to 90%, RHL non−condensing INCLUDED ACCESSORIES: Power supply Product Dimensions 6.22cm x 5.