Spec Sheet

SID-X1N
DisplayPort, HDMI, VGA & DVI Auto
Switcher over DGKat
|VGA/UXGA-15-pinHD |DVI |HDMI
|HDCPCompliant |DGKat
The SID−X1N is a DGKat™ twisted pair transmitter
and step−in commander for computer graphics video,
HDMI, DVI, DisplayPort and unbalanced stereo audio
signals. The unit includes a “Step−In” button that
allows the local source to be routed as the active
source on the main display through the main switcher
FEATURES
Max. Data Rate-4.95Gbps (1.65Gbps per graphics channel)
Compatible Switcher-VP−81SIDN
HDTV Compatible
HDCP Compliant-Works with sources that support HDCP repeater mode
HDMI Support-x.v.Color™ and 3D
EDID Pass–through-Pass–through algorithm ensures Plug and Play operation for HDMI source and
display systems
Data Equalization and Reclocking
Input Signal Detection-Based on video clock presence
Automatic Input Selection-Based on manual selection or last connected input
Automatic Analog Audio Detection and Embedding
Local Balanced Audio De-embedding
Support for Digital Audio Formats
Lockable EDID
DGKat™ Signal Integration-Kramer’s unique technology for converting TMDS as well as control and
communication to signals that run over twisted pair cables
Cable-Requires STP (shielded twisted pair) cable. For optimum range and performance, use
shielded Kramer CAT 6 or CAT 7 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non−Kramer CAT 6 and CAT 7 cables
may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to
ground
Power Connect™ System-A single connection to the transmitter powers both units when the devices
are within 150ft (50m) of each other
Local Step-In Switching-Button & contact closure
Power Supply-Requires independent power supply
