K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 Getting Started Achieving the Best Performance Recycling Kramer Products 2 2 3 3 Overview 4 4 Defining the Tavor 5-O 6 5 5.1 5.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual i 2.1 Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility.
3 Overview The Tavor 5-O is a powered two-way speaker system designed for indoor wall mounting. The system accepts a line level stereo input and amplifies it using a built-in amplifier and outputs a speaker signal to the passive speaker. The Tavor 5-O speaker system features: Three available inputs (that can either be connected separately or connected simultaneously to form a mix of the inputs) that consist of: A Line level unbalanced stereo audio input on a 3.
Figure 1 and Figure 2 show examples of how the speakers can be installed in conference room and home theater setups, respectively.
4 Defining the Tavor 5-O This section defines the active Tavor 5-O: Figure 3: Tavor 5-O Active Speaker 6 Tavor 5-O - Defining the Tavor 5-O
# 1 Feature SPEAKER OUT Connectors Function Connect the active speaker to the (+) and (-) stereo sockets on the passive speaker The L speaker is active and the R speaker is passive 2 3 4 INPUT Connectors 5-pin Terminal Block 3.
5 Installing the Speakers This section explains how to: 5.1 Choose the best location for your speakers (see Section 5.1) Install the speaker wires (see Section 5.2) Choosing the Best Location Before installing the speakers: Experiment by placing the speakers in different locations before finally deciding on the most suitable location Be sure that the wall type is appropriate for the mounting brackets, that is, either solid wood, bricks, concrete, hollow building blocks, or wood studs.
2. Connect the audio source (for example, a CD or a DVD player and so on) to one of the INPUT connectors on the active speaker. 3. Connect the power. 4. Adjust the volume on the input source. 5. Adjust the volume control on the rear side control panel. 6. Adjust the bass and treble control on the rear side control panel. 7. If required, connect an additional set of speakers by connecting the LOOP OUTPUT connector to the input of a second active speaker. 8.
6 Technical Specifications Audio and Power 2-way powered speaker DESCRIPTION: BUILT IN POWER AMPLIFIER: 2 x 30W RMS; 2 x 80W continuous program FREQUENCY RESPONSE: 45Hz to 20kHz @ -10dB 100Hz to 20kHz @ ±3dB WOOFER: 5 1/4” polypropylene cone with rubber edge woofer TWEETER 1/2" Mylar dome tweeter SENSITIVITY: 85dB SPL, 1W@1m MAX SPL: Continuous: 105dB Peak: 110dB POWER SOURCE: 90−240V AC 50/60Hz CROSSOVER FREQUENCY: 8kHz DIRECTIVITY FACTOR (Q): 5.
This page is intentionally left blank
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.