Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 4 5 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Getting Started This quick start chart summarizes the basic setup and operation steps. N O Step 1: Connect the inputs and outputs - see section 5 V E L On the TP-114, connect: E Q .
Overview 3 Overview Your Kramer TOOLS TP-114 1:4 XGA/HD DA/CAT 5 Transmitter is a high-performance distribution amplifier for computer graphics video or HDTV signals. It converts a computer graphics video or HDTV signal on a 15-pin HD connector to four identical twisted pair signals.
Overview cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP, may be used. Bear in mind, though, that we advise using STP cables where possible, since the compliance to electromagnetic interference was tested using those cables. Although Unshielded Twisted Pair (UTP) cable might be preferred for long range applications, the UTP cable should be installed far away from electric cables, motors and so on, which are prone to create electrical interference.
Your TP-114 1:4 XGA/HD DA/CAT 5 Transmitter 4 Your TP-114 1:4 XGA/HD DA/CAT 5 Transmitter Figure 1 and Table 1 define the TP-114: 5 4 3 2 6 1 7 1 8 2 3 6 4 5 7 8 Figure 1: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter Table 1: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter Features # Feature 1 LINE OUT 1 RJ-45 Connector 2 LINE OUT 2 RJ-45 Connector 3 LINE OUT 3 RJ-45 Connector 4 LINE OUT 4 RJ-45 Connector 5 6 7 8 12V DC XGA IN 15-pin HD Connector XGA OUT 15-pin HD Connector ON LED Function Connec
Configuring a TP-114 XGA/HD Line Transmitter – DA System Figure 2 and Table 2 define the TP-114 underside panel: Figure 2: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter (Underside Panel) Table 2: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter (Underside Panel) Features # Feature 1 VS Switch 2 5 HS Switch Function Slide the switch up 1 to change the VS polarity to NEGATIVE polarity 2; slide the switch down to NORMAL to retain the polarity Slide the switch up1 to change the HS polarity to NEGATIVE polarity2; slide the
Configuring a TP-114 XGA/HD Line Transmitter – DA System 1. On the TP-114, connect the XGA/HD source (for example, a computer graphics/HD source) to the XGA IN 15-pin HD connector, and connect the line output RJ-45 connector1: OUT 1 connector to the LINE IN RJ-45 connector on the first TP-120 OUT 2 connector to the LINE IN RJ-45 connector on the second TP-120 OUT 3 connector to the LINE IN RJ-45 connector on the third TP-120 OUT 4 connector to the LINE IN RJ-45 connector on the fourth TP-120 2.
V E L O N Configuring a TP-114 XGA/HD Line Transmitter – DA System VGA Display 1 :4 1 D H / A G X 5 T A C / A D r te it m s n a r T 4 1 -1 P T Long CAT 5 cable A G X e in L r e iv e c e R . Q E E L TP-120 TP-114 LINE O UT 3 LINE OUT 4 A VG VGA L O N Long CAT 5 cable Computer Graphics Source A G X e in L r e iv e c e R E Q .
Technical Specifications 5.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2900- 000183 Rev: 2 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
