Spec Sheet

TP-582R
1+1 HDMI Receiver with Ethernet, RS−232,
IR & Stereo Audio over Extended−Reach
HDBaseT
|HDMI |Ethernet-RJ-45 |HDCPCompliant
|HDBaseT
TP−582R is a high−performance, extended−reach
HDBaseT receiver for 2 mirrored 1080p60Hz HDMI,
Ethernet, RS−232 and IR signals over twisted pair.
The TP−582R converts the transmitted HDBaseT
signal to all output signals, and de−embeds the audio
to S/PDIF and TOSLINK® audio outputs. It extends
video signals to up to 130m (430ft) over CAT copper
cables at up to 1080p@60Hz 36bpp video resolution
FEATURES
High Performance Standard Extender-Professional HDBaseT extender for providing extended−reach
signals over twisted−pair copper infrastructures, with mirrored 1+1 HDMI output signals. TP−582R is
a standard extender that can be connected to any market−available HDBaseT−compliant extension
product. For optimum extension reach and performance, use recommended Kramer cables
HDMI Signal Extension-HDCP 2.2 compliant. Supports deep color, x.v.Color™, lip sync, HDMI
uncompressed audio channels, Dolby TrueHD, DTS−HD, 2K, and 3D. EDID signals are passed
through from the source to the display
I−EDIDPro™ Kramer Intelligent EDID Processing™-Intelligent EDID handling, processing and
pass−through algorithm that ensures Plug and Play operation for HDMI source and display systems
Multi−channel Audio Extension-Up to 8 channels of digital stereo uncompressed signals for
supporting studio−grade surround sound
Audio De-embedding (Drop-and-Continue)-The transmitted digital audio signal is extracted from the
AV signal (dropped), for transmission to stereo digital audio outputs, in parallel to being transmitted
(continued) to the HDMI AV output. This enables high−quality audio playback by routing the audio to
external speakers in parallel to routing the audio to the connected AV acceptor device’s local
speakers (such as TVs with speakers)
Ethernet Extension-Ethernet interface data flows in both directions, allowing extension of up to
100Mbps Ethernet connectivity for LAN communication and device control
Bidirectional RS-232 Interface-Serial interface data flows in both directions, allowing data
transmission and device control
Bidirectional Infrared Extension-IR interface data flows in both directions, allowing remote control of
peripheral devices located at either end of the extended line
Cost-effective Maintenance-Status LED indicators for HDMI and HDBT ports facilitate easy local
maintenance and troubleshooting
Easy and Elegant Installation-Requires shielded twisted pair (STP) cable. For optimum range and
performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BCP−DGKat724 cables. Note that
the transmission range depends on the signal resolution, graphics card and display used. The
distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only
shielded cable where both ends of the shield are soldered to ground
