Spec Sheet

TP-789R
4K60 4:2:0 HDMI Bidirectional PoE Receiver
with RS−232 & IR over Long−Reach
HDBaseT
|HDMI |HDBaseT |4K/60UHD(4:2:0)
|HDCP2.2Compatible
TP−789R is a high−performance, long−reach
HDBaseT receiver for 4K60Hz (4:2:0) HDMI, RS−232
and IR signals and two−way powering over twisted
pair. It extends video signals to up to 40m (130ft) over
Kramer copper cables at up to 4K@60Hz (4:2:0)
24bpp video resolution and provides even further
reach for lower HD video resolutions. This receiver
either provides power over the copper extension cable
to a POE (Power over Ethernet) acceptor device such
as a PoE wall−plate, or accepts PoE through the
extension cable from a PoE provider remote device,
as auto−sensed by the receiver
FEATURES
High Performance Standard Extender-Professional HDBaseT extender for providing long−reach
signals and powering over twisted−pair copper infrastructures. TP−789R is a standard extender that
can be connected to any market−available HDBaseT−compliant extension product. For optimum
extension reach and performance, use recommended Kramer cables
Bidirectional PoE (Power over Ethernet)-Auto−senses the extension line PoE status and either
provides power to a remote POE acceptor such as a PoE wall−plate, or accepts power from a remote
PoE provider such as a PoE matrix
HDMI Signal Extension-Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio
channels, Dolby TrueHD, DTS−HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals
are passed through from the source to the display
I−EDIDPro™ Kramer Intelligent EDID Processing™-Intelligent EDID pass−through algorithm that
ensures Plug and Play operation for HDMI source and display systems
Multi−channel Audio Extension-Up to 32 channels of digital stereo uncompressed signals for
supporting studio−grade surround sound
Bidirectional RS−232 Extension-Serial interface data flows in both directions, allowing data
transmission and device control
Bidirectional Infrared Extension-IR interface data flows in both directions, allowing remote control of
peripheral devices located at either end of the extended line
Cost-Effective Maintenance-Status LED indicators for HDMI and HDBT ports and PoE feed status
facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS−232
connection ensures lasting, field−proven deployment
Easy Installation-Single cable connectivity for both HDBaseT signals and power. Compact
DigiTOOLS® fan−less enclosure for dropped−ceiling mounting, or side−by−side mounting of 3 units in
a 1U rack space with the recommended rack adapter
