Spec Sheet

TP-789Rxr
4K60 4:2:0 HDMI Bidirectional PoE Receiver
with Ethernet, RS−232 & IR over
Extended−Reach HDBaseT
|HDMI |Ethernet-RJ-45 |HDBaseT
|4K/60UHD(4:2:0) |HDCP2.2Compatible
TP−789Rxr is a high−performance, extended−reach
HDBaseT receiver for 4K60Hz (4:2:0) HDMI, Ethernet,
RS−232 and IR signals and 2−way powering over
twisted pair. It extends video signals to up to 100m
(330ft) over Kramer copper cables at up to 4K@60Hz
(4:2:0) 24bpp video resolution and provides even
further reach for lower HD video resolutions. This
receiver either provides power over the copper
extension cable to a POE (Power over Ethernet)
acceptor device such as a PoE wall−plate, or accepts
PoE through the extension cable from a PoE provider
remote device, as auto−sensed by the receiver
FEATURES
High Performance Standard Extender-Professional HDBaseT extender for providing extended−reach
signals and powering over twisted−pair copper infrastructures. TP−789Rxr is a standard extender that
can be connected to any market−available HDBaseT−compliant extension product. For optimum
extension reach and performance, use recommended Kramer cables
Bidirectional PoE (Power over Ethernet)-Auto−senses the extension line PoE status and either
provides power to a remote POE acceptor such as a PoE wall−plate, or accepts power from a remote
PoE provider such as a PoE matrix
HDMI Signal Extension-Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio
channels, Dolby TrueHD, DTS−HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals
are passed through from the source to the display
I−EDIDPro™ Kramer Intelligent EDID Processing™-Intelligent EDID pass−through algorithm that
ensures Plug and Play operation for HDMI source and display systems
Multi−channel Audio Extension-Up to 32 channels of digital stereo uncompressed signals for
supporting studio−grade surround sound
Ethernet Extension-Ethernet interface data flows in both directions, allowing extension of up to
100Mbps Ethernet connectivity for LAN communication and device control
Bidirectional RS−232 Extension-Serial interface data flows in both directions, allowing data
transmission and device control
Bidirectional Infrared Extension-IR interface data flows in both directions, allowing remote control of
peripheral devices located at either end of the extended line
Cost-Effective Maintenance-Status LED indicators for HDMI and HDBT ports and PoE feed status
facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS−232
connection ensures lasting, field−proven deployment
Easy Installation-Single cable connectivity for both HDBaseT signals and power. Compact
DigiTOOLS® fan−less enclosure for dropped−ceiling mounting, or side−by−side mounting of 3 units in
a 1U rack space with the recommended rack adapter
