User Manual

Overview
3
3 Overview
The Kramer VA-1VGAN is a VGA EDID Capture, with VGA input and
output on 15-pin HD computer graphics video connectors. When the VA-
1VGAN is connected to a display device and the CAPTURE EDID button
is pressed, the VA-1VGAN reads and stores the EDID (Extended Display
Identification Data) from the display device
1
. The display can be
disconnected and later reconnected without rebooting the operating system.
Specifically, the VA-1VGAN features:
 15-pin HD connectors for input and output signals
 An EDID capture pushbutton
 An ON LED
 5V DC power
To achieve the best performance:
 Use only good quality connection cables
2
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
 Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VA-1VGAN away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
3
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Some computers need to have the EDID information available when they boot up, otherwise the VGA output may be
disabled
2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
3 For example, part number 2535-052002