Spec Sheet

VM-114H
2x1:4 HDMI & PoC Long−reach DGKat with
RS−232 & IR to HDMI switchable DA
|HDMI |HDCPCompliant |DGKat
The VM−114H is a PoC switcher/distribution amplifier
for HDMI and DGKat™ twisted pair signals. It reclocks
and equalizes one of two selectable input signals and
distributes it to four identical HDMI outputs
FEATURES
Max. Data Rate-6.75Gbps (2.25Gbps per graphic channel, HDMI), 4.95Gbps (1.65Gbps per graphic
channel, DGKat)
HDTV Compatible
HDCP Compliant
DGKat™ Signal Integration-Kramer’s unique technology for converting TMDS as well as control and
communication to signals that run over twisted pair cables
EDID Pass–through-Pass–through algorithm ensures Plug and Play operation for HDMI source and
display systems
HDMI Support-Deep Color (on the HDMI input), x.v.Color™, HDMI Uncompressed Audio Channels,
Dolby TrueHD, DTS−HD
3D Pass-Through
Kramer Equalization & re-Klocking™ Technology-Rebuilds the digital signal to travel longer
distances
System Range-Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using
Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and
display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to
the connectors for the products to function properly
Active Input & Output LED Indicators
Power Connect™ System-A single connection to the transmitter or the receiver powers both units
when the devices are within 90m (270ft) of each other
Flexible Control Options-Front panel buttons, RS−232, IR control sensor, remote included
Desktop Size-Compact size. 2 units can be rack mounted side−by−side in a 1U rack space with the
recommended rack adapter
