Spec Sheet

VM-114H2C
2x1:2+2 HDMI & DGKat with RS−232 & IR to
HDMI & PoC Long−reach DGKat switchable
DA
|HDMI |HDCPCompliant |DGKat |KramerCore
The VM−114H2C is a high−performance PoC switcher
and distribution amplifier for HDMI and DGKat™
twisted pair signals. It reclocks and equalizes one of
two selectable input signals (HDMI or DGKat twisted
pair) and distributes it to two DGKat twisted pair and
two HDMI outputs
FEATURES
Max. Data Rate-6.75Gbps (2.25Gbps per graphic channel) (HDMI), 4.95Gbps (1.65Gbps per graphic
channel) (DGKat)
HDTV Compatible
HDCP Compliant
DGKat™ Signal Integration-Kramer’s unique technology for converting TMDS as well as control and
communication to signals that run over twisted pair cables
EDID Pass–through-Pass–through algorithm ensures Plug and Play operation for HDMI source and
display systems
HDMI Support-x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD (only on
the TP inputs and outputs)
3D Pass-Through
Kramer Equalization & re-Klocking™ Technology-Rebuilds the digital signal to travel longer
distances
System Range-Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using
Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and
display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to
the connectors for the products to function properly
Active Input & Output LED Indicators
Compatible Transmitters/Receivers-Transmitters: PT−571, TP−573, TP−577; Receivers: PT−572,
TP−575, TP−576, TP−577
Power Connect™ System-A single connection to the transmitter or the receiver powers both units
when the devices are within 90m (270ft) of each other
Flexible Control Options-Front panel buttons, RS−232, infrared control sensor, remote included
Desktop Size-Compact size. 2 units can be rack mounted side−by−side in a 1U rack space with the
recommended rack adapter
