USER MANUAL MODEL: VM-3DT 1:3 HDBT Distributor P/N: 2900-300796 Rev 1 www.KramerAV.
Contents Introduction Getting Started Overview Typical Applications About HDBaseT™ Technology Using Twisted Pair Cable for HDBT Defining the VM-3DT 1:3 HDBT Distributor Connecting the VM-3DT Operating the VM-3DT Routing the IR and RS-232 Signals Acquiring an EDID Upgrading the Firmware Default EDID Technical Specifications Default Communication Parameters Protocol 3000 Understanding Protocol 3000 Kramer Protocol 3000 Syntax Protocol 3000 Commands VM-3DT - Contents 1 1 2 3 3 3 4 5 6 6 9 10 11 14 15 16 17 1
Kramer Electronics Ltd. Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.
Kramer Electronics Ltd. Safety Instructions Caution: There are no operator serviceable parts inside the unit. Warning: Use only the power cord that is supplied with the unit. Warning: Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only. Warning: Disconnect the power and unplug the unit from the wall before installing.
Kramer Electronics Ltd. • HDMI Signal Transmission – HDMI 2.0 and HDCP 1.4 compliant signal, supporting deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS−HD, CEC (OUT 1 only), 2K, 4K, and 3D. • I−EDIDPro™ Kramer Intelligent EDID Processing™ – An intelligent EDID handling, processing and pass−through algorithm that ensures Plug and Play operation for HDMI source and display systems.
Kramer Electronics Ltd. Defining the VM-3DT 1:3 HDBT Distributor This section defines the VM-3DT. Figure 1: VM-3DT 1:3 HDBT Distributor Front Panel # Feature Function ON LED Lights when the unit receives power. PROGRAM Mini USB Connector Use to send serial commands, see Protocol 3000 on page 16. Connect to a PC to perform firmware upgrades (via K-Upload) and work with the EDID Designer. K-Upload and EDID Designer can be downloaded from our Web site at: www.kramerav.com/support/product_downloads.
Kramer Electronics Ltd. Connecting the VM-3DT Always switch off the power to each device before connecting it to your VM-3DT. After connecting your VM-3DT, connect its power and then switch on the power to each device. To connect the VM-3DT as illustrated in the example in Figure 2: 1. Connect the HDBT input source (for example, TP-580T) to the HDBT IN connector 2. Connect the three HDBT outputs devices). . to three HDBT receivers (for example, TP-580R 3.
Kramer Electronics Ltd. Operating the VM-3DT This section describes how to: • Route the IR and RS-232 signals via the HDBT ports (see Routing the IR and RS-232 Signals on page 6). • Acquire the EDID (see Acquiring an EDID on page 9). • Perform firmware upgrade via K-Upload (see Upgrading the Firmware on page 10). Routing the IR and RS-232 Signals VM-3DT transports IR and RS-232 signals between the HDBT input and the three HDBT outputs.
Kramer Electronics Ltd. Signal Routing Example The example in Figure 5 shows the VM-3DT connected to two TP-580R devices. An additional TP-580R device can also be connected. The table below summarizes the types of connections: Output # VM-3DT TP-580R (1) TP-580R (2) HDMI OUT: Projector Display INPUT TP-580T (Blu-ray player) IR Emitter Sensor RS-232 RC-43SL Projector Display RS-232 and IR signals are transparently routed between the VM-3DT source and two acceptors.
Kramer Electronics Ltd.
Kramer Electronics Ltd. Acquiring an EDID You can acquire the EDID from a connected output or set the VM-3DT to the default EDID. To acquire an EDID, press the EDID SETUP button as follows: 1. Press EDID SETUP once. The OUTPUTS CONNECTED LEDs flash to indicate the current EDID used: 1, 2, or 3, or all if the default EDID is currently used. 2.
Kramer Electronics Ltd. Upgrading the Firmware Use the Kramer K-UPLOAD software to upgrade the firmware via the VM-3DT PROG. Mini USB port . The latest version of K-UPLOAD and installation instructions can be downloaded from our website at: www.kramerav.com/support/product_downloads.asp. Note that in order to use the mini USB port, you need to install the Kramer USB driver, available at: www.kramerav.com/support/product_downloads.asp.
Kramer Electronics Ltd. Default EDID This section lists the default HD EDID. Monitor Model name............... VM-3DT Manufacturer............. KMR Plug and Play ID......... KMR0672 Data string.............. Default-EDID Serial number............ 2 Manufacture date......... 2012, ISO week 255 Filter driver............ None ------------------------EDID revision............ 1.3 Input signal type........ Digital Color bit depth.......... Undefined Display type............. Monochrome/grayscale Screen size....
Kramer Electronics Ltd. 1152 x 864p at 75Hz - VESA STD EIA/CEA-861 Information Revision number.......... 3 IT underscan............. Supported Basic audio.............. Supported YCbCr 4:4:4.............. Not supported YCbCr 4:2:2.............. Not supported Native formats........... 1 Detailed timing #1....... 1920x1080p at 60Hz (16:10) Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Detailed timing #2....... 1920x1080i at 60Hz (16:10) Modeline............
Kramer Electronics Ltd.
Kramer Electronics Ltd. Technical Specifications Input: 1 HDBT on an RJ-45 female connector Outputs: 3 HDBT on RJ-45 female connectors Extension Line / Range: HDBaseT 1.0 compliant Up to 40m (130ft) at 4K@60Hz (4:2:0) Up to 70m (230ft) at full HD (1080p@60Hz 36bpp) Note: The specs only apply when using Kramer HDBaseT cables. This reach applies to each IN and OUT port separately; the total end-to-end reach is the sum of all ports’ reach. Video: Up to 4K@60Hz (4:2:0) resolution; Up to 10.2Gbps (3.
Kramer Electronics Ltd.
Kramer Electronics Ltd. Protocol 3000 The VM-3DT 1:3 HDBT Distributor can be operated using the Kramer Protocol 3000 serial commands. The command framing varies according to how you interface with the VM-3DT. Generally, a basic video input switching command that routes a layer 1 video signal to HDMI out 1 from HDMI input 2 (ROUTE 1,1,2), is entered as follows: • Terminal communication software, such as Hercules: The framing of the command varies according to the terminal communication software. .
Kramer Electronics Ltd. For more information about Protocol 3000 commands, see: • Understanding Protocol 3000 on page 17 • Kramer Protocol 3000 Syntax on page 18 • Protocol 3000 Commands on page 19 Understanding Protocol 3000 Protocol 3000 commands are structured according to the following: • Command – A sequence of ASCII letters (A-Z, a-z and -). A command and its parameters must be separated by at least one space.
Kramer Electronics Ltd. Kramer Protocol 3000 Syntax The Kramer Protocol 3000 syntax uses the following delimiters: • CR = Carriage return (ASCII 13 = 0x0D) • LF = Line feed (ASCII 10 = 0x0A) • SP = Space (ASCII 32 = 0x20) Some commands have short name syntax in addition to long name syntax to enable faster typing. The response is always in long syntax.
Kramer Electronics Ltd.
Kramer Electronics Ltd. FACTORY Functions FACTORY Set: Get: Description Permission End User Syntax Set: Reset device to factory default configuration #FACTORYCR Get: Response ~nn@FACTORYSPOKCR LF Transparency Public - Notes This command deletes all user data from the device. The deletion can take some time. Your device may require powering off and powering on for the changes to take effect.
Kramer Electronics Ltd. PROT-VER Functions Set: PROT-VER? Get: Permission Transparency Public Description End User Syntax Set: Get: #PROT-VER?CR Get device protocol version Response ~nn@PROT-VERSP3000:versionCR LF Parameters version - XX.
Kramer Electronics Ltd.
Kramer Electronics Ltd.
Kramer Electronics Ltd. EDID Handling Commands Additional EDID data functions can be performed via a compatible EDID management application, such as Kramer EDID Designer (see www.kramerav.com/product/EDID%20Designer).
The warranty obligations of Kramer Electronics Inc. (“Kramer Electronics”) for this product are limited to the terms set forth below: What is Covered This limited warranty covers defects in materials and workmanship in this product.
P/N: 2900- 300796 Rev: 1 SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. www.KramerAV.com info@KramerAV.
