Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 4 4.1 4.2 4.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps 1.
Overview 3 Overview The Kramer TOOLS VP-200K, VP-300K and VP-400K are 1:2, 1:3 and 1:4 (respectively) distribution amplifiers for UXGA and higher resolution signals. The VP-200K, VP-300K and VP-400K accept one input, provide correct buffering and isolation, and then distribute the signal to two, three or four (respectively) identical outputs on high-density 15-pin HD connectors.
Your High Resolution XGA DA 3.
Your High Resolution XGA DA 4.
Your High Resolution XGA DA 4.
Your High Resolution XGA DA 4.
Connecting the VP-300K 1:3 High Resolution UXGA DA 5 Connecting the VP-300K 1:3 High Resolution UXGA DA To connect your VP-300K 1:3 High Resolution UXGA DA 1, as the example in Figure 4 illustrates, do the following 2: 1. Connect a computer graphics source to the INPUT 15-pin HD connector. 2.
Connecting the VP-300K 1:3 High Resolution UXGA DA Figure 4: Connecting the VP-300K 1:3 High Resolution UXGA DA 9
Technical Specifications 6 Technical Specifications Table 4 includes the technical specifications: 1 Table 4: Technical Specifications of the High Resolution UXGA DA VP-200K VP-300K 1 UXGA on an 15-pin HD connector 2 UXGA on 15-pin HD 3 UXGA on 15-pin HD connectors connectors MAX. OUTPUT LEVEL: 2.2Vpp INPUT: OUTPUTS: VP-400K 4 UXGA on 15-pin HD connectors BANDWIDTH (-3dB): 400MHz DIFF. GAIN: DIFF.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2 9 0 0 - 0 0 0 3 8 5 QS Rev: Kramer Electronics, Ltd. 3 Web site: www.kramerelectronics.com E-mail: info@kramerel.