Spec Sheet

VP-427A
HDBaseT to HDMI & Audio ProScale™
Receiver/Scaler
|HDMI |HDBaseT
The Kramer VP−427A is a receiver/scaler for
HDBaseT twisted pair, HDMI, bidirectional RS−232
and IR signals. The unit receives an HDBaseT signal
that it converts to HDMI, IR and RS−232 signals. It
up− or down−scales the picture to match the
resolution of the HDMI monitor. It includes a
simultaneous analog audio output of the embedded
HDMI audio
FEATURES
Max. Data Rate-6.75Gbps (2.25Gbps per graphic channel)
Bidirectional RS-232 Port-For embedding/de−embedding control commands in the HDBaseT data
stream
Infrared Input and Output Ports-For controlling devices over the HDBaseT data stream
System Range-Up to 70m (230ft)
Embedded Audio-Support for LPCM 2CH
Analog Audio Output-Includes a simultaneous unbalanced stereo audio output of the embedded
HDMI audio
Constant Output Sync-Even when the input video signal is lost or interrupted
ProcAmp Control-Contrast, brightness, fine tune & R, G, B level/gain
On-Screen Display (OSD)-For easy setup and adjustment, accessible via the front−panel buttons
Non-Volatile Memory-Saves final settings
Freeze Button
USB Port-For upgrading firmware
