Spec Sheet

VP-428H2
DisplayPort, HDMI & VGA Auto
Switcher/Scaler and PoE Provider over
HDBaseT with 4K60 4:4:4 HDCP 2.2 Input
Support
|VGA/UXGA-15-pinHD |HDMI |Ethernet-RJ-
45 |HDBaseT |HDCP2.2Compatible
VP−428H2 is an HDBaseT 4K transmitter/scaler with
HDMI, DP and VGA inputs. VP−428H2 supports
HDBaseT tunneling of Ethernet, bidirectional RS−232
and IR signals, as well as PoE to provide power to the
HDBaseT receiver. It receives the selected AV signal,
up−scales, down scales or bypasses the video,
according to the settings selected by the user, and
converts it for sending via HDBaseT, together with the
tunneled data and PoE
FEATURES
PixPerfect™ Scaling Technology-Kramer’s precision pixel mapping and high−quality scaling
technology
HDMI Support-HDCP 2.2 Compliant. 4K60, CEC, xvYCC color (on input), Dolby TureHD/DTS−HD
Master Audio as specified in HDMI 2.0
HDBaseT Certified
System Range-For the HDBaseT output, extended reach of up to 100m (330ft) using Kramer
recommended cables
Provides Power (PoE) on HDBaseT Output to Compatible Devices
Max. Resolutions-Input: 4K@60Hz (4:4:4); Output: 4K@60Hz (4:2:0)
Max. VGA Resolution-1920 x 1200 @60Hz
Built-in ProcAmp-Color, hue, sharpness, noise, contrast and brightness are set individually for each
input
Constant Output Sync-No output disruption while switching between inputs when no video is
detected
Audio-Unbalanced stereo and embedded audio
Auto Input Switching-Last connected & auto−scan, selectable
HDBaseT Tunneling-Supports full HDBaseT tunneling of Ethernet and RS−232 data
Non-Volatile Memory-Saves final settings
Flexible Control Options-Front panel push buttons, RS−232, OSD (on−screen display) menu with
front panel navigation buttons
