Spec Sheet
VP-440X
18G 4K Presentation Switcher/Scaler with
HDBaseT & HDMI Simultaneous Outputs
|HDMI |Microphone-3.5/6.5mm |Ethernet-RJ-
45 |HDBaseT |4K/60UHD(4:4:4)
VP−440X is a high−performance 18G 4K HDR
presentation switcher/scaler with four HDMI inputs
and one computer graphics (VGA) input. It scales the
video, embeds the audio, and outputs the signal to
two identical outputs – one HDMI and one HDBaseT –
together with an analog stereo audio output. Via
HDBaseT, it extends video signals to up to 40m
(130ft) over CAT copper cables at up to 4K@60Hz
(4:2:0) 24bpp video resolution and provides even
further reach for lower HD video resolutions
FEATURES
High-Performance Professional Scaler-Up−scales, down−scales and cross−scales up to resolutions
of 4K@60 (4:4:4). The output resolution can be set to the native resolution either of the sinks, or
manually set to another resolution. When the product is configured to scale to 18G 4K resolutions,
the HDBT output automatically down−samples the chroma sampling to 4:2:0 coding
Smooth Switching-Constant output sync, prevents output glitches while switching between inputs,
even when no video is detected
Flexible Digital and Analog Audio-Select a dedicated unbalanced analog audio input to embed into
each input. In addition, a microphone input is provided on the front panel for mixing, switching or
talk−over. Any of the signals can play audio through the unbalanced audio output
Powerful Audio Processing-Supports DSP technology including audio equalization, mixing, delay,
and microphone talk−over (ducking)
HDMI Signal Extension-HDCP 2.2 and HDCP 1.4 compliant
HDR-Supports HDR10
EDID Pass-Through-EDID passed through from the source to the display
CEC Support-Supports passing of CEC from input to output. Automatically sends CEC commands to
shut down the output display after a timeout period when no input signal is found and to power up the
display when the input returns
Bidirectional RS-232 Extension-Serial interface data flows in both directions, on each extension
line, enabling data transmission and control of devices
Diverse Control Options-Control the unit using an OSD (On−Screen Display) via front panel buttons,
embedded web pages via Ethernet and/or serial communication via RS–232 transmitted by a PC,
touch screen system or other serial controller. Additionally, connect to the contact closure connector
for remote switching of sources and for toggling the display ON and OFF
Easy Installation-½ 19” size enables mounting in a 1U rack space with the recommended rack
adapter