Spec Sheet
VS-211UHD
2x1 4K60 4:2:0 HDMI Auto Switcher with
Audio
|HDMI |4K/60UHD(4:2:0)
The VS−211UHD is an automatic switcher for
4K@60Hz (4:2:0) HDMI and analog audio signals. The
VS−211UHD automatically switches one of two HDMI
inputs to a predefined or last connected input
whenever the currently active video signal is
interrupted or whenever a higher−priority video signal
is detected
FEATURES
Max. Data Rate-8.91Gbps (2.97Gbps per graphic channel)
Max. Resolution-4K@60Hz (4:2:0)
Compliance-HDCP and DVI 1.0
-Deep Color, 3D, up to 7.1 uncompressed audio channels, ARC (supported on Input 1 only)
Features Kramer reKlocking™ Technology-Rebuilds the digital signal to travel longer distances
HDTV Compatible
Customized Audio Output-Embed a companion analog audio signal into its HDMI input signal,
de−embed the audio from the HDMI input and route it to the balanced stereo audio line out,
de−embed HDMI ARC from the output and route it to the balanced stereo audio line out, or route the
analog audio inputs directly to the stereo audio line out
Automatic Video Input Detection & Selection
Auto Power Off-When no HDMI input for 10 seconds (selectable)
Step-In Over HDMI Technology
Active Switching-Selectable manual or fast auto switching according to last connected or preset
priority
Selectable HDCP Switching
EDID Configuration Options
Default EDID
Contact Closure-For remote manual switching override
Lock Button
Firmware Upgrade-Over RS–232, mini–USB
Software Support-Protocol 3000, EDID Designer, K–Upload via RS–232
Varied Control Options-Front panel buttons, contact closure, IR, RS–232 Protocol 3000
Easy Installation-Compact MegaTOOLS® fan−less enclosure for surface mounting or side−by−side
mounting of 2 units in a 1U rack space with the recommended rack adapter