Spec Sheet

WP-572

HDMI HDCP 2.2 Wall Plate Receiver over

PoC Long−Reach DGKat (EU, UK, US−D)

|HDMI |HDCPCompliant |DGKat |KramerCore

|HDCP2.2Compatible

The WP−572 is a PoC DGKat™ twisted pair receiver

for HDMI signals. The WP−571 converts an HDMI

signal to a single twisted pair signal and the WP−572

converts the twisted pair signal back to an HDMI

signal

FEATURES

Max. Data Rate-4.95Gbps (1.65Gbps per graphic channel)

HDTV Compatible

HDCP Compliant

DGKat™ Signal Integration-Kramer’s unique technology for converting TMDS as well as control and

communication to signals that run over twisted pair cables

HDMI Support-x.v.Color™, up to 7.1 Uncompressed Audio Channels

3D Pass-Through

System Range-Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using

Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and

display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to

the connectors for the products to function properly

EDID PassThru-Passes EDID signals between the source and display

ON LED-Lights red when receiving power only, orange when either input or output and power are

attached, and green when both an active input and output are attached

Power Connect™ System-A single connection to the transmitter powers the receiver

Dimensions-3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H

Wall Plate Size-1 gang US



PAGE 1
WP-572 HDMI HDCP 2.2 Wall Plate Receiver over PoC Long−Reach DGKat (EU, UK, US−D) | HDMI | HDCP Compliant | DGKat | Kramer Core | HDCP 2.2 Compatible The WP−572 is a PoC DGKat™ twisted pair receiver for HDMI signals. The WP−571 converts an HDMI signal to a single twisted pair signal and the WP−572 converts the twisted pair signal back to an HDMI signal FEATURES Max. Data Rate - 4.95Gbps (1.
PAGE 2
TECHNICAL SPECIFICATIONS INPUTS: 1 DGKat™ twisted pair on a RJ−45 connector OUTPUTS: 1 HDMI connector BANDWIDTH: Up to 4.95Gbps data rate (1.65Gbps per graphics channel) COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP POWER CONSUMPTION: US: 12V DC, 190mA (single device); 360mA total (when one device supplies the power to both devices).
PAGE 3
CONFIGURATIONS WP-572/US(W) US–size Wall–Plate Receiver, with White 1–gang Design Frame WP-572/US(B) US–size Wall–Plate Receiver, with Black 1–gang Design Frame WP-572/EU(W)-80 EU–size Wall–Plate Receiver, with White 1–gang Design Frame WP-572/EU(B)-80 EU–size Wall–Plate Receiver, with Black 1–gang Design Frame WP-572/EU(G)-80 EU–size Wall–Plate Receiver, with Gray 1–gang Design Frame WP-572/EU(W)-86 UK–size Wall–Plate Receiver, with White 1–gang Design Frame WP-572/EU(B)-86 UK–size Wall–Plate