Operation Manual

Small repairs - Do it yourself!

You only get a weak flow of water or no water at all !

The injector may be

dirty and you

should

first

remove

the

hose.

Now turn on the water

and you should get a

powerful stream of water,

then straighten

a paper clip,

and release the

injector with an

open-ended

spanner.

Check that

is clean.

Reconnect the

hose,

and you are

ready to

continue

your work.

Remove the injector

together with the

spring and return

valve.

Cleaning the injector through

from both sides and replace

the return valve.

The pressure gauge shows a 10% higher pressure than the

working pressure.

but if you

only get a weak

flow of water