User manual

3. Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’ button on
your wireless access point (the button used to activate WPS standby
mode may have another name), or use other way to start WPS standby
mode as the instruction given by your wireless access point’s user manual.
4. Before you start to establish the wireless connection by using WPS,
you can click ‘Rescan’ button to search for WPS-enabled access points
near you, to make sure the WPS function of your access point is activated.
All access points with WPS function enabled will be displayed. Please
make sure the access point you wish to connect is displayed. If not, please
click ‘Rescan’ few more times. You can also click ‘Information’ button to
see the detailed information about selected access point.
5. Start PBC pairing procedure at access point side (please refer to the
instruction given by your access point’s manufacturer), then click ‘PBC’