User manual

select ‘Auto’ to let configuration utility to decide to
use wireless protection or not. You can also select
‘ON’ or ‘OFF’ to force the use of wireless protection
or not.
Beacon(ms) You can define the time interval that a beacon signal
should be send. Default value is 100. Do not modify
this value unless you know what will be affected.
TX Power You can select the wireless output power here.
Please select a proper output power setting
according to your actual needs. You may not need
100% of output power if other wireless clients are
not far from you.
Idle Time Select the idle time of your wireless network card.
Default value is 300. Do not modify this value
unless you know what will be affected.
No forwarding Check this box and wireless clients will not be able
among wireless to share data with each other.
clients
Hide SSID Check this box and the SSID will not be broadcasted
to the public. Your wireless clients must know the
exact SSID to be able to connect to your computer.
This option is useful to enhance security level.
Allow BW Check this box to allow BW 40MHz capability.
40 MHz
Default Click this button to restore all settings in this page
back to default value.
Apply Click this button to activate current settings.
To exit, click ‘X’ button at the upper-right corner of configuration
window.