USB HUB 2.0 PCMCIA 3 ports Guida Rapida Quick Guide Cod. KR.G2 Avvertenza Qualsiasi variazione fatta dall’utilizzatore o da altri non autorizzati può compromettere la conformità e la sicurezza del prodotto di cui il produttore non si ritiene responsabile Warning The manufacturer is under no circumstances liable for any unauthorised modifications made to the product by the user or any other parties which may compromise its conformity and safety. www.kraun.
Quick Guide 1. Introduction Add a USB device to your PC ☞ Instantly add USB peripherals to your PC or Notebook. Never open your computer case again after you have your USB Port (PCI/PCMCIA) card installed and say good-bye to confusing cables. ☞ The USB Port (Universal Serial Bus) allows you to instantly connect USB devices to your computer. ☞ You never have to worry about running out of slots in your computer or those confusing IRQ’s again. You can also “Hot Swap” your USB devices.
Quick Guide System Requirements This setup program will install the driver for NEC USB 2.0 Host Controller. Before you start to run the setup program, please make sure your computer is an IBM PCcompatible system. This driver can be used either the following operating systems: • Windows 2000. • Windows XP. • Windows VISTA Driver Limitations Current limitations of the driver are: Composite devices and Hi-Speed Isochronous Transfers are currently not supported. 2. Driver Installation 1.
Quick Guide 3. After restarting your system, please check if your device works. [My Computer][Properties][Hardware][Device Manager] Note. If there is a yellow exclamation mark on “NEC PCI to USB 2.0 Enhanced Host Controller” or “USB 2.0 Root Hub Device”, please remove this item from the “Device Manager” by clicking the “Uninstall” button and click “Refresh” to re-install this driver again. 4 www.kraun.
Guida Rapida 1. Introduzione Aggiungi dispositivi USB al tuo computer ☞ Aggiungi istantaneamente periferiche USB al tuo PC or Notebook. Non avrai più bisogno di aprire il case del tuo computer o usare cavi confusi, dopo aver installato una scheda (PCI/PCMCIA) con porte USB. ☞ La porta USB (Universal Serial Bus) ti permette di collegare istantaneamente dispositivi USB al tuo computer. ☞ Non dovrai più preoccuparti della mancanza di slot sul computer o di quei complicati cavi di connessione.
Guida Rapida Requisiti di sistema Il programma di installazione installerà I driver per il dispositivo. Prima di iniziare ad avviare il programma di installazione, accertare che sul cmputer sia un sistema IBM PC compatibile. Il driver può essere usato con i seguenti sistemi operativi: • Windows 2000. • Windows XP. • Windows VISTA Limitazioni Driver Limitazioni del driver: Dispositivi compositi e trasferimenti isocrono ad alta velocità non sono attualmente supportati. 2. Installazione Driver 1.
Guida Rapida 3. Dopo aver riavviato il sistema, controllare se il dispositivo funziona correttamente. [My Computer][Properties][Hardware][Device Manager] Nota. Se c’è un punto esclamativo giallo su “NEC PCI to USB 2.0 Enhanced Host Controller” o su “USB 2.0 Root Hub Device”, rimuovi questa voce da “Device Manager” cliccando il pulsante “Uninstall” e clicca “Refresh” per installare nuovamente il driver. www.kraun.
www.kraun.