I N S TA L L AT I O N MA N UA L Glass Vessel Sink www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation • Unpack your new product and ensure that all the parts are contained in the packaging • • • • • Keep the product in its original box until you’re ready to install it The counter top must be flat Shut off the water supply if replacing a previously-installed vessel sink Observe all plumbing and building codes in your area It is recommended that installation of the product be done by a professional plumber
Kraus Glass Vessel Sinks Specifications DIMENSIONS: 14’’ - 17’’ GLASS THICKNESS: 12mm -19mm DRAIN OPENING: 1.
g Ring Installer Tip Shut off main water supply before installation.
Installation Instructions Before you begin Prepare counter top by drilling a 1 3/4’’ diameter drain hole at the desired location. Install mounting ring. Place vessel sink on the mounting ring or counter top as shown below. Vessel Sink Counter Top Mounting Ring 1 3/4” (Suggested) 1. Make sure the vessel sink is not scratched, chipped or broken prior Pop Up Drain Top to installation. Thin Soft Rubber Washer 2.
r Washer Pop Up Drain & Mounting Ring Installation (ONLY IF INCLUDED) Pop Up Drain Top Pop Up Drain Mounting Ring White Rubber Washer Top View Inner Black Rubber Washer Pipe Bottom View Concave Washer Firm Washer Locate and disassemble your pop up drain in the following order: • Unscrew the tail piece • Unscrew the brass nut • Remove the firm washer • Remove the concave washer, leaving the top thin rubber washer on.
(Suggested) Pop Up Drain Top Thin Soft Rubber Washer Pop Up Drain White Rub Inner Black Rub Concave Washer Tail Pipe B Firm Washer Nut DO NOT OVER TIGHTEN THE DRAIN!!! 1. From above the countertop, insert the drain body into the 1 3/4” drain opening of your sink. 2. From underneath the countertop, insert the concave white rubber washer onto the drain. 3. Pushing the washer all the way up until it is in contact with the countertop. 4.
Codes/Standards Applicable: HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a HOMEOWNER please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus Pro Representative at: Kraus USA, Inc.
www.kraususa.
R E G I S T E R Y O U R P R O D U C T T O D AY Scan to Register Onlin e We’re always looking for ways to improve. Please take a moment to share your experience. Visit www.kraususa.com and let us know what you think. Contact Us To Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.com Like & Follow KrausUSA www.kraususa.
