I N S TA L L AT I O N MA N UA L Ceramic Bathroom Vessel Sinks KCV-120 / KCV-121 / KCV-122 / KCV-125 KCV-135 / KCV-140 / KCV-141 KCV-142 / KCV-150 www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation: • Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
Adjustable wrench Tools you will need: Silicone Sealant Silicone Adhesive Safety Goggles Drill 4” Hole Saw Pencil Tape Measure Dimensions 18-3/4" 476mm 15” 381mm R.79 20 R1.57 40 15” 381mm R.79 20 18-3/4" 476mm Ø1-3/4” 45mm Ø1-3/4” 45mm 14-1/4" 362mm R1.57 40 Ø1-3/4” 45mm 14-1/4" 362mm Ø1-3/4” 45mm Ø1-3/4” 45mm 14-1/4" 362mm Ø1-3/4” 45mm 14” 356mm 20° R0.59 15 1-3/4” 45mm 20° 2.5° 1/4" 15mm 1-3/4” 45mm 1-3/4” 45mm KCV-120 15” x 15” x 5 1/4” 4 2.
16” 406mm Dimensions 19-1/4” 489mm 19-1/4” 489mm R2.36 60 16” 406mm Ø1-3/4” 45mm 16” 406mm 16” 406mm R2.36 60 19-1/4” 489mm Ø1-3/4” 16” 406mm Ø1-3/4” 45mm 45mm Ø1-3/4” 45mm 16” 406mm 11-3/4” 11-3/4” 298mm298mm 45mm Ø1-3/4” Ø1-3/4” 45mm 3/8” 10mm 10” 255mm 3-3/4” 95mm 10” 255mm 3-3/4” 95mm R0.20 1-3/4" 3-1/2” 5 [45] 90mm 5” 127mm 3/4” 20mm R0.59 15 2” 50mm 1-3/4" [45] 1-3/4" [45] 4-1/2” 114mm 11-3/8” 290mm 2” 50mm KCV-122 19 1/4” x 1115-1/2” 3/4” x 5” 3-1/2” 90mm 2.
Dimensions Ø1-3/8” Ø35mm Ø18-1/4” 463mm Ø1-3/8” Ø35mm Ø18-1/4” 463mm Ø1-3/4” 45mm 7-1/4” 184mm Ø1-3/4” 45mm Ø1-3/4” 45mm 7-1/4” 184mm Ø1-3/4” 45mm Ø1-3/8” Ø35mm Ø18-1/4” 463mm 1-1/4” 32mm 5-5/16” 5-5/16” 135mm 135mm 9/16” 15 mm R 7.87 200 R 7.87 200 9/16” 15 mm 1-1/4” 32mm Ø1" Ø 25mm 6-1/4” 158mm 5-5/16” 135mm R.59 15 R 0.39 10mm Ø5-1/2” Ø140mm 1-3/8” 35mm 1-3/8” 35mm Ø1" Ø 25mm 3/8” 10mm R.59 15 Ø1" Ø 25mm 3/8” 2.5° 10mm 2.5° Ø3-1/8” Ø 80mm R 0.
1. Mark faucet and drain hole location • Place sink in desired location on countertop and mark drain hole and faucet hole centerline with a pencil NOTE: Make sure clearance is suitable for backsplash, faucet, and sink plumbing NOTE: Please allow a minimum of 4.5” from wall to edge of sink for faucet placement clearance NOTE: For model numbers KCV-142 and KCV-150, faucet hole location should be measured from center of drain hole to center of faucet hole on sink 2” 2 1/2” 2.
2” 2 1/2” 3. Install sink 2” 2 1/2” • Check the alignment of the sink to the opening in the countertop. Use a bead of clear silicone (or preferred adhesive) around the underside of the sink • Carefully place the sink on the countertop, align, and press firmly • Allow sealant to set for 30 – 60 minutes NOTE: Please make sure Kraus logo is facing you when mounting sink Use acetone or rubbing alcohol to remove any excess sealant immediately after application NOTE: 4.
Codes/Standards Applicable: KRAUS LIMITED LIFETIME WARRANTY This product has been manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is not transferable, between homes or owners and is only applicable to residential use.
C. Kraus recommends installing all Kraus products with a licensed, professional plumber. Kraus will not be held responsible for any damage or product failure due to improper installation, misuse, or failure to use a licensed professional. Please read your care and maintenance documentation to determine the limits of proper use. D. Commercial use will automatically void this warranty. E. This warranty is not applicable to Kraus products purchased from an unauthorized seller.
HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a HOMEOWNER please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus Pro Representative at: Kraus USA, Inc.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.
