R INSTALLATION MANUAL Ceramic Bathroom Vessel Sinks KCV-120 / KCV-121 / KCV-122 / KCV-125 / KCV-126 / KCV-127 KCV-135 / KCV-140 / KCV-141 / KCV-142 / KCV-150 / KCV-341 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Inspect the sink prior to installation to make sure that it has not been cracked or chipped during shipping.
Tools you will need Safety Goggles Drill Silicone Adhesive Pencil Tape Measure 4" Hole Saw Dimensions 15 1/4" (386mm) 19 1/4" (488mm) R 1 5/8" (40mm) 14" (356mm) 15 1/4" (386mm) Ø1 3/4" 18" (458mm) (45mm) R 5/8" (40mm) Ø2 3/4" 4 3/8" (15mm) (110mm) 5 1/2" 1 5/8" (140mm) (15mm) (110mm) 4 3/8" R 5/8" 1 3/4" Ø2 3/4" (45mm) (70mm) (70mm) KCV-120 15 1/4 " x 15 1/4 " x 5 1/2" 4 KCV-121 19 1/4" x 15 1/4" x 5 3/8" (135mm) 14" (356mm) 14" (356mm) Ø1 3/4" (45mm) 15 1/4" (386mm)
Dimensions 16 3/4" (427mm) Ø1 3/4" 19 3/8" (493mm) 16 3/4" (427mm) (60mm) Ø1 3/4" (45mm) 11" (280mm) 11 3/4" (300mm) 15 1/4" (387mm) (45mm) R2 3/8" 10" (255mm) 18 5/8" (473mm) 15 1/4" (387mm) (290mm) (70mm) KCV-122 19 3/8" x 11 3/4" x 5 1/8" KCV-125 16 3/4" x 16 3/4" x 4 1/2" 18 1/8" (460mm) Ø1 3/4" 16 1/2" (420mm) 15 3/8" (390mm) 16 1/2" (420mm) 5 1/2" (140mm) 4 1/4" (109mm) 16 7/8" (430mm) Ø1 3/4" (45mm) 4" (101mm) 15 1/4" (388mm) 15 1/4" (388mm) 5 1/2" R 3 1/4" (83.
Dimensions 15 3/4" (400mm) Ø1 3/4" (45mm) 15 3/4" (400mm) 14 5/8" (372mm) (450mm) Ø1 3/4" (45mm) R3 7/8" R 30" (762mm) Ø17 3/4" (100mm) 14 5/8" (372mm) Ø17 1/4" 1/4" (15mm) Ø8 1/2" (215mm) KCV-135 15 3/4 " x 15 3/4 " x 6 1/8" KCV-140 Ø17 3/4" x 5" Ø16" Ø1 3/4" Ø18 1/4" (45mm) (463mm) Ø1 3/8" (35mm) 7 1/4" (406mm) Ø14 3/4" (375mm) (184mm) (70mm) (10mm) 3 1/8" R 5/8" Ø2 3/4" (6mm) Ø17 3/8" Ø1 3/4" (442mm) (45mm) 5/8" Ø5 1/2" (140mm) KCV-141 Ø16" x 6 1/4" 6 (10mm) (200
18 5/8" (472mm) (135mm) (45mm) Ø13" Ø13 3/4" (330mm) (350mm) Ø2 3/4" (70mm) KCV-150 18 5/8" x 18 5/8" x 5 3/4" 4 1/8" (105mm) (135mm) Ø1" (25mm) 5 3/8" (45mm) 3 3/4" (32mm) (15mm) Ø1 3/4" Ø1 3/4" (147mm) 1 1/4" R 5/8" (320mm) 12 5/8" 5 3/8" (35mm) 17 3/8" (442mm) 5 3/4" Ø1 3/8" (96.
1. Mark Faucet and Drain Hole Location · Place sink in desired location on countertop and mark drain hole and faucet hole centerline with a pencil. NOTE: Make sure clearance is suitable for backsplash, faucet, and sink plumbing. NOTE: Please allow a minimum of 4.5” from wall to edge of sink for faucet placement clearance. NOTE: For model numbers KCV-142 and KCV-150, faucet hole location should be measured from center of drain hole to center of faucet hole on sink. 2” 2 1/2” 2.
3. Install Sink · Check the alignment of the sink to the opening in the countertop. Use a bead of clear silicone (or preferred adhesive) around the underside of the sink. · Carefully place the sink on the countertop, align, and press firmly · Allow sealant to set for 30 – 60 minutes NOTE: Please make sure Kraus logo is facing you when mounting sink NOTE: Use acetone or rubbing alcohol to remove any excess sealant immediately after application 4. Install Plumbing Fixtures · Connect drain to sink.
Codes/Standards Applicable: UP C C R Ceramic Bathroom Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Ceramic Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Ceramic Sink) to be free from defects in material and workmanship under normal usage for the lifetime of the product.
Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
