INSTALLATION GUIDE Single Lever Lavatory Faucet FVS-1005 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800775-0703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone • Place bucket under angle stops.
• Collection Name Vessel Mixer • Mount Type Deck Mount • Mounting Type Single-hole, top-mount • Material Solid Brass • Gross Weight (Lbs) 4.70 • Length 5.50 • Width 5.50 • Faucet Holes / Holes Required 1 • Faucet Height 13.10 • Spout Reach 5.50 • Spout Height 8.10 • Flow Rate (GPM) 1.
Faucet Installation Procedure ° 4
Faucet Installation Procedure Step 1 Install faucet body and base trim ring through top of sink Step 2 From underneath the sink,replace mounting hardware assembly. Tighten lock nut to secure the body.
Step 3 Apply pipe tape on threads of the inlet port. Tighten end of shank with wrench and slip hose into the inlet port. Step 4 Apply pipe tape onto threads of the water supply. Tighten the hose onto water supply. Step 5 After installing faucet, remove aerator and turn on water to remove any left of debris.
Replacement Parts Keep this manual for ordering replacement parts. 1. 2. 3. 4. 5. 1. Handle Cap 2. Metal Handle 3. Trim Cap 4. Locking Nut 5. Ceramic Disc Cartridge 6. Base Trim Ring 7. Mounting Hardware Assembly 6. 8. Aerator 9. Cover Plate & Putty Plate 8. 7. 9.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE 10 Leakage under the 9 handle. Hexagon Nut Adjusting locking nut come loose. 11 has 12 13 ACTION Tighten the adjusting ring or cap. Aerator drips or has inconsistent water flow pattern. Aerator is dirty or misfitted. Unscrew the aerator to check rubber packing or replace the aerator.
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
